Zeolite for Swimming Pool Water Filtration

Zeo-Clear is an all natural Zeolite granular filtration media that improves water clarity. Buy Now - 25 lb. Buy Now - 50 lb.

Benefits:
• Improves Water Clarity
• Traps particles and ammonium ions that cause eye burning chloramines
• Reduces need for chemical shock treatments
• All natural
• Improves filtration

Directions:
1. Rinse and Clean filter tank
2. Fill 1/3 of filter tank with water
3. Install pea gravel or chat to top of the laterals (see chart below)
4. Determine amount of Zeo-clear needed (note: 50 lbs of Zeo-Clear equals 100lbs of sand in volume, 25 lbs equals 50 lbs in volume)
5. Fill tank with required amount of Zeo-Clear
6. Return distributor or stand-pipe to proper position. Check air vent tube and exterior piping for proper operation
7. Start filter in backwash mode to remove dust from media, backwash until water is clear. Turn off filter pump and allow media to settle. Repeat backwash and rinse cycles 2 or more times.

(Note: Some filters also use gravel in the filter bed. Always consult filter manufacturers literature for proper gravel specifications and media bed depth. Zeo-Clear Zeolite replaces sand at same bed depth.